★★★★★
Great lamp, with a couple caveats
Overall I'm quite happy with this lamp. Four color temps, enhanced functionality via the remote, ability to angle the lights pretty much in any direction, and the ability to control the lights individually. That last ...
Read full review
Overall I'm quite happy with this lamp. Four color temps, enhanced functionality via the remote, ability to angle the lights pretty much in any direction, and the ability to control the lights individually. That last feature works so well, I was able to set each to a different color and intensity, turn them all off via the remote, then back on and the settings are recalled.This enhanced functionality comes with some caveats. First off, things aren't explained quite clearly enough in the manual, which is one reason I'm writing this review. The remote did work without any pairing, but the brightness and temp controls only worked on one light. I re-paired remote and lamps via the instructions, which worked, but again only one light responded to the brightness and temp controls on the remote (first it was #3; then #1 after the re-pairing). Granted, I hadn't read the manual at this point. It does state "M (One click recovery): One key restores the brightness to 4000K 50%, and the lights can be operated at the same time". Sure enough, the M button did just that. I probably didn't need to do two re-pairings of the remote, just RTFM and press M ;-)The caveat is that once you go into individual programming mode using the remote (by turning on any given light, then long-pressing the corresponding button on the remote; light blinks once), the brightness and temp buttons only work on that light. You can switch to another light using the same steps, but now that light is the one controlled. If you power them all off, then back on, the "last used" light setting is recalled; so, e.g., if #3 was the last light you were controlling individually, it is the one you're controlling now, until you either, 1) choose a different light, or 2) use M to recover the default settings, at which point the brightness and temp buttons work on all three, but you've lost any individual settings.A workaround for this, should you wish to set each differently, preserve the settings, and have the brightness buttons on the remote work on all three simultaneously, is to set them via the controls on the pole. Make sure that you've recovered the default setting via the M button, then adjust each light via the buttons on the pole. Once you've got each light the way you want it, turn them all off via the remote, then back on. Color temp and brightness are recalled. The brightness buttons still control all three. The color temp buttons also work on all three, cycling through. That's an interesting experiment, but if you've bothered tailoring each light to such specific settings, you're not likely to want the warm one to become the cool one, and the cool one to become warm. YMMV, of course.A correction to the manual regarding "lamp" [i.e., individual light] control. For each light it states:"After turning off the lamp, it needs memory function. Long press: the lamp flashes once...."it should read"After turning ON the lamp, it needs memory function. Long press: the lamp flashes once...."Turning off a lamp/light, then long-pressing that lamp/light's button will do nothing. With the lamp/light on, the long-press instructions work as stated.I'm not dinging them a full star, as the functionality is all there and works as stated, just that it could be stated more clearly, and hopefully more briefly than I managed.On the whole, I recommend this lamp.
ThurstonX